Complete Guide to How or Solution to Overcome / Fix Custom Binary Blocked FRP Lock Samsung – For Samsung smartphone users who like to customize the Android operating system, it may already be familiar if you get Custom Binary problems that are blocked by FRP Lock. But for new users, this might be something unnatural and often panic when they encounter this problem.
Custom Binary Blocked usually occurs because of the customization process carried out on a smartphone. For example, installing a custom TWRP (Team Win Recovery Project), rooting, and upgrading / downgrading / reinstalling the android rom. Then, how and why did this happen? In short, custom binaries are blocked due to OEM unlock in the Developer Options menu, which is inactive or inactive.
So that when finished customizing the Android OS and the OEM unlock position is not active, then the phone will not be able to enter the cwm/custom TWRP menu and even to open the main screen of the system. This is commonly called a boot loop (login stuck to the smartphone logo only).
So when you experience or find this on your Samsung smartphone, don’t panic yet. Because of all the problems, there must be a solution, so also the issues that occur on Samsung smartphones.
Well, here, Frp Bypass will describe briefly and clearly to solve Samsung’s Custom Binary Blocked FRP Lock problem. But before I go on, I need to remind my friend that if your smartphone is damage due to the information on this website, the admin/writer on the FRP Bypass Apk website is not responsible.
Fix Custom Binary Blocked By FRP Lock
To fix a custom binary blocked by merely installing a new ROM into the phone. Installation of this new ROM can be done in 2 ways.
Step 1: First, with flash/reinstall your Android ROM. For the tutorial, please open the article How to Flash / Reinstall Android ROM via the ODIN application.
Step 2: The second installation of new ROMs through the Samsung Kies 3 application. For the second way, this is what I will discuss on this occasion. For more details, please follow the steps below.
(1) Reinstall ROM / Firmware
- One of the best ways to overcome Samsung’s Custom Binary Blocked By FRP Lock, is by flashing the firmware / Stock ROM again.
- For the tutorial, I have discussed separately. Please open the Guide on How to Flash / Install Samsung Firmware / ROM Via ODIN.
(2) Through Samsung Kies
Step 1: Download Samsung USB Driver then installs it into the computer. And don’t forget to restart your computer shortly after the installation process is complete.
Step 2: Download the Samsung Kies3 application then install it into the computer. Once installed, run the application. Next, click on the ” Tools ” menu then select ” Firmware upgrade and Initialisation.”
Step 3: Enter the model number in the column provided. For example, the SM-J700F (for Samsung Galaxy J7), the SM-J500F (for Samsung Galaxy J5), or other Samsung Bypass Google Verify APK models.
Usually, for the model, we can get it in the box or in the smartphone itself, precisely under the battery. After entering the model number, then click OK.
Step 4: Enter the serial number code (S / N) again. For this code, you can find on the inside or the smartphone box. Usually, if you want to see it on the inside of the phone, we must first remove the back cover and remove the battery.
But not all serial numbers can be found in that section, depending on the smartphone model itself. What is clear, please look for the code number that reads S / N in front of it. After entering the serial number code, the next step is to click OK> OK.
Step 5: After the OK button is clicked on the Kies3 application, there will be a pop-up on the computer screen asking you to connect your cellphone to the computer. Now at this stage, please deactivate your Samsung cellphone then enter the Downloading Menu.
The trick is simply pressing the Home + Power + Volume Down simultaneously approximately 3-5 seconds. After that, continue by pressing the Volume Up button to continue or continue.
Step 6: Connect the smartphone to the computer via a USB cable. In this case, I suggest using an original cable so that the smartphone can be read correctly by the Kies3 application.
Step 7: Return to the computer. After the smartphone is fully connected to the network, the ” Start Upgrade ” button will automatically activate. Please click on the button to begin the installation process of the new Firmware / ROM and wait for the process to finish.
Step 8: If the installation process runs correctly and successfully, then your smartphone will restart by itself and will go directly to the initial setup menu. The same list as when you first used the cellphone. Done.
The above method you can use for the following Samsung Galaxy Series Smartphone categories:
- Samsung Galaxy J Series = SM-J100H, SM-J120G, SM-J105F, SM-J110G, SM-J111F, SM-J106B, SM-J200G, SM-G532G, SM-J320G, SM-J500G, SM-J510FN, SM -J700F, SM-G610F, SM-J710FN, SM-J730G
- Samsung Galaxy A Series = SM-A320Y, SM-A300H, SM-A310F, SM-A500F, SM-A520F, SM-A510FD, SM-A710FD, SM-A720F, SM-A910F
- Samsung Galaxy E Series = SM-E500H, SM-E700H
- Samsung Galaxy S Series = SM-G920F, SM-G925F, SM-G9287C, SM-G930FD, SM-G935FD, SM-950FD, SM-955FD
- Samsung Galaxy Note Series = SM-N910H, SM-N9208
- Samsung Galaxy Tab Series = SM-P355, SM-T231, SM-T531, SM-T705, SM-T719Y, SM-T116NU, SM-T285, SM-T365, SM-T715Y, SM-T805, SM-T815Y, SM -T819Y, SM-T585Y, SM-T111
If it fails, what to do?
If the above process fails, there will be a message or notification from the Samsung Kies3 application. To overcome this, the following tips I can give.
- Please read the steps carefully. Don’t miss anything.
- Check your internet connection. Try at the time of installation, the link to the internet must be stable and not cut off.
- Check the USB cable that you are using. If there is a problem with the USB cable, please replace it with another one.
Help and Suggestions
So that Custom Binary is no longer blocked, the way is effortless. Activate the “OEM Unlock” mode in the “Developer Option” menu. Here are the steps.
- Enter the Settings menu. Then scroll down and find “Developer Options.” If this menu does not exist or is hidden, please follow the explanation below.
- Find and open “About device / About cellphone.”
- Scroll down and tap on “Software Info.”
- Tap on the “Build Number” 5 to 7 times until a message says that the Developer Option is active.
- Press the back button until the main settings menu. The friend will find the menu right in the second from the bottom.
- Next, enter the Developer Options menu. Find and activate “OEM Unlock.”